The taper pin provides a cheap, convenient method of fixing the hub of a gear or a pulley to a shaft. The pin is driven into a tapered hole that extends radially through the hub and shaft.
The angle of the taper is always the same, 1/4" reduction over a 12" length Measure the Taper Pin by the largest diameter and then the total length.
| Product ID | Description | | | |
|---|
| PTA.15*1.5 | No.0 x 1.1/2 Taper Pins (5/32 x 1.1/2) | | | |
| PTA.15*2.0 | No.0 x 2 Taper Pins (5/32 x 2) | | | |
| PTA.17*1.0 | No.1 x 1 Taper Pins (11/64 x 1) | | | |
| PTA.19*1.5 | No.2 x 1.1/2 Taper Pins (3/16 x 1.1/2) | | | |
| PTA.19*2.0 | No.2 x 2 Taper Pins (3/16 x 2) | | | |
| PTA.21*2.5 | No.3 x 2.1/2 Taper Pins (7/32 x 2.1/2) | | | |
| PTA.21*3.0 | No.3 x 3 Taper Pins (7/32 x 3) | | | |
| PTA.25*1.5 | No.4 x 1.1/2 Taper Pins (1/4 x 1.1/2) | | | |
| PTA.25*2.0 | No.4 x 2 Taper Pins (1/4 x 2) | | | |
| PTA.25*2.5 | No.4 x 2.1/2 Taper Pins (1/4 x 2.1/2) | | | |
| PTA.31*1.5 | No.5 x 1.1/2 Taper Pins (19/64 x 1.1/2) | | | |
| PTA.31*2.0 | No.5 x 2 Taper Pins (19/64 x 2) | | | |
| PTA.31*3.0 | No.5 x 3 Taper Pins (19/64 x 3) | | | |
| PTA.34*2.0 | No.6 x 2 Taper Pins (11/32 x 2) | | | |
| PTA.34*2.5 | No.6 x 2.1/2 Taper Pins (11/32 x 2.1/2) | | | |
| PTA.34*3.0 | No.6 x 3 Taper Pins (11/32 x 3) | | | |
| PTA.40*2.25 | No.7 x 2.1/4 Taper Pins (13/32 x 2.1/4) | | | |
| PTA.40*3.0 | No.7 x 3 Taper Pins (13/32 x 3) | | | |
| PTA.49*3.0 | No.8 x 3 Taper Pins (1/2 x 3) | | | |
| PTA.49*6.0 | No.8 x 6 Taper Pins (1/2 x 6) | | | |
| PTA.59*4.0 | No.9 x 4 Taper Pins (19/32 x 4) | | | |
| PTA.59*6.0 | No.9 x 6 Taper Pins (19/32 x 6) | | | |
| PTA.70*4.0 | No.10 x 4 Taper Pins (23/32 x 4) | | | |
| PTA.70*6.0 | No.10 x 6 Taper Pins (23/32 x 6) | | | |
| PTA06*040 | 6mm x 40mm Taper Pins | | | |
| PTA08*040 | 8mm x 40mm Taper Pins | | | |
| PTA10*100 | 10mm x 100mm Taper Pins | | | |
